1/4 HP Utility Pump, 1900 GPH Portable Submersible Sump Pump, Manual Control with 16.4 ft Cord, for Pool Hot Tub Pond Basement Draining

The FLUENTPOWER FSP250C-1A is a compact submersible utility pump for transferring clean water from pools, hot tubs, rain barrels and water tanks. Its 1/4 HP motor delivers up to 1,900 GPH through a 1-inch discharge hose in a horizontal setup, while the maximum lifting height is 23 ft. Maximum flow and maximum head are separate ratings and are not achieved simultaneously. Actual performance depends on pumping height, hose diameter, hose length and fittings. Manual operation requires approximately 6 inches of water to start and can reduce the water level to approximately 3/5 inch. The pump requires supervision during use. Disconnect the power before the pump runs dry; it does not automatically stop at the minimum water level. MANUAL CONTROL & WATER LEVELS: Manually operated with no automatic water-level shutoff. Requires approximately 6" of water to start pumping and can reduce the water level to approximately 3/5" during operation. Monitor the water level and disconnect power before the pump runs dry. PERFORMANCE DEPENDS ON SETUP: Delivers up to 1900 GPH using a 1" discharge hose in a horizontal setup, with a maximum head of 23 ft. Maximum flow and maximum head are not achieved at the same time. Actual flow varies with pumping height, hose diameter and length, and fittings. TWO HOSE CONNECTION OPTIONS: Includes a 3/4" male GHT adapter for a garden hose with a matching female GHT connector, plus a 1" discharge hose adapter. Choose the connection that matches your hose; a garden

Specifications

• Gallons per minute: 31.67 GPM
• Horsepower: 0.25 HP
• Plumbing pump type: Submersible Sump Pump
• Fuel type: Electric
• Power type: Manual
• Brand: FLUENTPOWER
• Volts: 110 Volts
• Weight: 6.5 lb
• Accessories: GHT 3/4" and NPT 1"
• Amps: 2.3 Amps
• Watts: 200 Watts
• Decibel rating: 30 dB